Close

Browsing as a

Close

Browsing as a

What's new at BristanNew designs and new finishes available now

Find out more >>>

Bristan Flow Limiters and Aerators


Installing water saving products not only helps the planet, but it’s also good for homeowners too.
With the average household using 440 litres of water a day, we’re committed to helping reduce this.

Our eco-friendly basin mixer taps feature built-in flow limiters/aerators to reduce the water flow to as little
as 3.5 litres per minute, for greater water efficiency and smaller household bills.

Outlet Flow Limiters



Flow limiters can easily be retro fitted between a mixer body/shower valve outlet connection and the shower hose.

However, please note for TMV2 approved products fitted on a combi boiler heating system, it’s recommended that flow limiters are fitted between the mixer body and both shower valve inlet connections.

This will ensure the valves performance is maintained, especially during the winter months, when the incoming water temperature is lower.

Bristan Outlet Flow Limiters SKUs

**Not suitable for use where products are fitted on a Combi system

Tap Flow Limiters and Aerators

 

Tap Flow Limiters and Aerators

*Flow regulators which fit into tap tail **Flow regulators which fit into tap spout


Fitting a Flow Limiter to the Tail of a Tap


Step One



The flow limiter will fit into
the inlet of the tap 

Step Two

Bristan - fitting a flow limiter - Step Two

Carefully push the flow limiter
into the inlet of the tap
 

Step Three

Bristan - fitting a flow limiter - Step Three

Connect the pipework to
the tap in the usual way
 


Fitting an Aerator / Spray Regulator to a Tap Spout

 

Step One

Bristan Fitting a Aerator Step One

Carefully remove the existing
flow straightener
 

Step Two

Bristan Fitting a Aerator Step Two

Screw the new flow regulating
aerator into place
 

Step Three

Bristan Fitting a Aerator Step Three

Carefully tighten into the tap
using a suitable spanner
 

Product Ranges



Here to Help

Award-winning customer services

Whether you need some product advice, help from customer services or to request a spare part or service engineer visit, get in touch with our team today.

Contact Us

Frequently asked questions

Need some help? Check our FAQ's for answers
to some of our most commonly asked questions.

FAQ's

Why choose Bristan

Bristan is the UK's number one for taps and showers, with straightforward solutions for every bathroom and kitchen that you can trust time and time again.

Why Bristan

The Bristan Group Limited 2019

Chartered Institute of Plumbing and Heating Engineering Logo
Also of Interest

Cookie Settings

By clicking the button "Accept all cookies", all categories of cookies will be activated. In the cookie settings you can edit your settings and tailor your cookie preferences. You can find further information about our cookies under cookie guidelines and privacy policy.